How Tall Can A Wakeboard Tower Be

ARDUINO With UsbAsp Write Bootloader (Windows Vista)

After breaking my arduino Mega I was stuck in my trials and my "work" is no longer going ahead. I also had a ten thousand
arduino not working, or rather what did not work was the chip.
I bought an ATmega168 and a pair of programmers usbasp to be able to put the Arduino bootloader, and then run it.
After days spent in the electronics cursing I finally managed to flashareil bootloader into the chip and to finally use this Arduino Ten thousand! I do not know why the latest drivers nothing works.

• Material Needed
  • A programmer UsbAsp taken on this site , is a kit, but do not need special skill to assemble. Just follow the video and the component list. On the PCB it says it all. Also I have to say that the admin of this site are very helpful. I have answered all the mail even after they have bought. Which has not happened with protostack.com. Ten thousand
    
  • Arduino ATmega168
  • 
    

• How about Windows Vista.

1. scaricatevi WinAvr, but not the last version but this version , of \u200b\u200bcourse
   
2. libusb install it you need to install this version . Before installing you must click Right on properties-> Compatibility-> Run this program in compatibility mode-> Windows XP Service Pack 2. If you have installed everything correctly you will see this screen:
3. Now download the driver from usbasp here and connecting the programmer.
   Choose the installation manual and do research throughout the drivers folder.
   
4. Press the start button, search for CMD then right-click that file and open the path.
5. Run cmd as administrator and cut it to an icon for the moment
6. Connect the jumper on the Arduino Ten Thousand Ext power generator and power on a 9 V
   The links between
7. UsbAsp and Arduino Arduino
   Ten thousand are as follows -> ISP10 (port dell'UsbAsp)
   
   1 (MOSI) -> 1
   12 (MISO) -> 9
   13 (SCK) -> 7
   Reset -> 5 GND
   -> 4
8. If you did everything right you can write:
   C: \\ Windows \\ system32> avrdude-c usbasp M168
   and you will see:
   

    Microsoft Windows [Version 6.0. 6000] 
    Copyright (c) 2006 Microsoft Corporation. All rights reserved. 
    
    C: \\ Windows \\ System32> avrdude-c-p usbasp M168 
    found 7 
    
    busses avrdude: AVR device initialized and ready to accept Instructions 
    
    Reading  
    
    
    Ten thousand now connected with PC and Arduino interfacing the Arduino IDE, then try the sketch blink. If the LED on pin 13 will flash then everything went well. 
    
    course there are plenty of ways to use UsbAsp, but this is my favorite.